13
Connecting Audio Source Units
The XDA-1 DAC preamplifier can connect to up to six different audio devices, using standard XLR connector
for the AES/EBU input, Standard RCA analog connectors for coaxial inputs, toslink connectors for optical
inputs and USB type B to A connector for USB input .
AES/EBU
Connects to an AES/EBU source using the standard XLR connectors
OPTICAL (OPT1 & OPT2)
Connects to an optical S/PDIF source using standard optical type connectors.
COAXIAL (CO.1 &CO.2)
Connects to a S/PDIF source using the standard RCA type connectors
USB
Connects to a USB audio interface using the standard USB type B to A connector.
After the connection is made the operating system detects it as a new hardware device.
Modern operation systems like Windows XP, Vista, Windows 7, Mac OS and Linux detect the
hardware directly and install the correct USB audio automatically.
Audio Applications
Under Windows XP, Windows Vista and Windows 7 the XDA-1 can be selected as an audio output device
under Control Panel > Hardware and Sound> Sound.
Under Mac OS X, you can select and configure the XDA-1 via the MIDI Setup application that can be found in
your application folder.
The XDA-1DAC preamplifier is a playback device and can replace your on board Soundcard fully for all stereo
playback functions.
Connecting To Amplifiers and Speakers
When connecting to amplifiers and speakers, make sure to use the properly labeled left channel, right
channel and subwoofer connections.
Check to make sure that you have connected the proper cables in the proper sequence:
1. DIFFERENTIAL OUTPUT
Left and right channel XDA-1 line balanced outputs into either the left and right balanced inputs of
your amplifier or preamp.
2. UNBALANCED OUTPUT
Left and right channel XDA-1 line RCA outputs into either the left and right balanced inputs of your
amplifier or preamp.
Also use high quality, 100% shielded, oxygen free copper cables.
Trigger Connections
5-12VDC trigger input and output are used to remotely trigger the XDA-1 or a connected device on and off.
Please ensure that the total of the loads connected to this trigger do not exceed 500mA.
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern